- 0091-022-66362797 / +91-9821025398
- ngchouhan@gmail.com / ganpatmetal03@gmail.com
Ganpat Metal manufactures and supplies Titanium Grade 1 Sheets — the purest commercially available titanium grade with the lowest strength and highest ductility among all CP titanium grades. These sheets conform to ASTM B265 Grade 1 / ASME SB265 and are widely used in applications requiring excellent corrosion resistance, formability and weldability.
Titanium Grade 1 (UNS R50250) is a commercially pure titanium with very low interstitial content, making it the most ductile and easily formed of all titanium grades. It is the preferred choice for applications involving severe forming operations, cladding and lining of chemical equipment.
Titanium Grade 1 sheets are selected according to the required thickness, width, length, finish and applicable standard for the project.
| Parameter | Specification |
|---|---|
| Material | Commercially Pure Titanium Grade 1 |
| Standard | ASTM B265 / ASME SB265 |
| UNS No. | R50250 |
| Thickness (Sheet) | 0.5 mm to 6 mm |
| Thickness (Plate) | 6 mm to 100 mm |
| Width | Up to 2500 mm |
| Length | Up to 6000 mm (custom lengths available) |
| Form | Sheet, Plate, Coil, Strip, Foil |
| Finish | Annealed, Pickled, Polished, Mill Finish |
| Manufacturing | Hot Rolled, Cold Rolled |
| Heat Treatment | Annealed |
| Additional Testing | IBR, Third-Party Inspection, NABL Lab Testing |
| Documentation | EN 10204 3.1 / 3.2 Mill Test Certificate |
The chemical composition of Titanium Grade 1 is controlled to the lowest interstitial levels among all CP titanium grades, giving it the highest ductility and formability.
| Element | Composition (%) |
|---|---|
| Titanium (Ti) | Balance (min. 99.5%) |
| Nitrogen (N) | 0.03 max |
| Carbon (C) | 0.08 max |
| Hydrogen (H) | 0.015 max |
| Iron (Fe) | 0.20 max |
| Oxygen (O) | 0.18 max |
| Other Elements (each) | 0.10 max |
| Other Elements (total) | 0.40 max |
The minimum mechanical requirements for Titanium Grade 1 per ASTM B265 are as follows:
| Property | Value |
|---|---|
| Tensile Strength (min) | 240 MPa (35 ksi) |
| Yield Strength 0.2% (min) | 170 MPa (25 ksi) |
| Elongation (min) | 24% |
| Reduction of Area (min) | 30% |
| Density | 4.51 g/cm³ |
| Modulus of Elasticity | 103 GPa |
| Hardness (Brinell) | 120 HB max |
| Melting Point | 1668°C |
| Standard | Designation |
|---|---|
| ASTM | B265 Grade 1 |
| ASME | SB265 Grade 1 |
| UNS | R50250 |
| AMS | AMS 4902 |
| ISO | ISO 5832-2 Grade 1 |
| DIN / EN | 3.7025 |
| JIS | JIS H4600 Grade 1 |
| BS | TA1 |
| GOST | VT1-0 |
| Form | Thickness | Width | Length |
|---|---|---|---|
| Sheet | 0.5 mm – 6 mm | Up to 1500 mm | Up to 3000 mm |
| Plate | 6 mm – 100 mm | Up to 2500 mm | Up to 6000 mm |
| Coil / Strip | 0.1 mm – 3 mm | Up to 1000 mm | As required |
| Foil | 0.05 mm – 0.5 mm | Up to 600 mm | As required |
Custom sizes, cut-to-length and special dimensions are available on request. Provide the required thickness, width, length and quantity for a quotation.
Inspection and testing are carried out according to the applicable ASTM specification and purchase order requirements.
Titanium Grade 1 is selected for applications requiring maximum formability and corrosion resistance in aggressive environments.
Ganpat Metal manufactures and supplies Titanium Grade 1 Sheets for industrial buyers across India. Orders can be prepared according to the required thickness, width, length, finish, quantity and inspection requirements.
For buyers sourcing other titanium grades, Ganpat Metal also supplies Grade 2, Grade 3, Grade 4, Grade 5 (Ti-6Al-4V), Grade 7, Grade 9, Grade 12 and Grade 23 (Ti-6Al-4V ELI) sheets and plates.
Ganpat Metal supports Titanium Grade 1 sheet requirements for domestic and international industrial projects.
India
UAE
Saudi Arabia
Oman
Australia
Malaysia
Singapore
Bangladesh
Egypt
Brazil
Russia
Kazakhstan
Share the following details with Ganpat Metal for a quotation:
| Requirement | Details to Provide |
|---|---|
| Grade | Titanium Grade 1 / ASTM B265 Gr.1 / UNS R50250 |
| Form | Sheet / Plate / Coil / Strip / Foil |
| Thickness | Required thickness in mm |
| Width | Required width in mm |
| Length | Required length in mm or cut-to-size |
| Finish | Annealed / Pickled / Polished / Mill Finish |
| Quantity | Required quantity in kg or pieces |
| Testing | IBR / TPI / NABL / UT / Other |
| Documentation | EN 10204 3.1 / 3.2 MTC or other |
