- 0091-022-66362797 / +91-9821025398
- ngchouhan@gmail.com / ganpatmetal03@gmail.com
Ganpat Metal manufactures and supplies Titanium Round Bars conforming to ASTM B348 / ASME SB348 and AMS aerospace standards in Grade 2 (CP Titanium), Grade 5 (Ti-6Al-4V / UNS R56400), and Grade 9 (Ti-3Al-2.5V / UNS R56320). Titanium round bars provide an unparalleled combination of extreme strength-to-weight ratio, outstanding fatigue endurance, and immunity to corrosion in seawater, wet chlorine, and bodily fluids.
Grade 2 offers excellent cold formability and chemical resistance for chemical processing equipment, chlor-alkali plants, and marine components. Grade 5 (Ti-6Al-4V) provides high tensile strength above 895 MPa for aerospace airframe fasteners, jet engine discs, medical bone screws, and motorsport components. Grade 9 provides 20-50% higher strength than CP grades with excellent cold bendability for hydraulic lines and marine shafts.
We supply titanium round bars from 3 mm to 250 mm diameter in annealed or solution-treated conditions with certified biomedical and aerospace test reports.
GM handles enquiries for Titanium Round Bars where buyers need to match round bar diameters, machining tolerances (h9, h11, k12), and material grade to engineering drawings or purchase specifications. The supplied range covers precision cold drawn, peeled, centerless ground, and forged round bars beginning from 3 mm up to 500 mm diameter, with cut-to-size billet and pre-machined options.
Grade selection should be based on the required mechanical properties, core hardness, chemical composition, and operating temperature conditions of the application. Buyers should also confirm the applicable standard specification (ASTM / ASME / DIN / EN), delivery condition (annealed, solution treated, or quenched & tempered), NDT testing (ultrasonic / PMI), and mill documentation before finalizing an order.
| Parameter | Specification |
|---|---|
| Standard Specifications | ASTM B348 / ASME SB348, AMS 4928 (Gr.5), AMS 4943 (Gr.9), ISO 5832-3 |
| Available Grades | Grade 2 (UNS R50400), Grade 5 (Ti-6Al-4V, UNS R56400), Grade 9 (UNS R56320) |
| Diameter Range | 3 mm to 250 mm diameter |
| Length | 100 mm to 4000 mm / Custom cut lengths |
| Heat Treatment | Annealed (700–785°C), Solution Treated & Aged (STA) for Gr. 5 |
| Surface Finish | Centerless Ground (h8/h9), Peeled & Polished, Smooth Machined |
| Density | 4.43 g/cm³ (Gr. 5) / 4.51 g/cm³ (Gr. 2) / 4.48 g/cm³ (Gr. 9) |
| Testing & Certification | PMI, Tensile, Hardness, Microstructure (Alpha-Beta ratio), UT to AMS 2631 |
| Documentation | EN 10204 Type 3.1 / 3.2 Mill Test Certificate |
Standard chemical composition limits conform to international metallurgical standards.
| Grade | Ti | Al | V | Fe max | O max | C max | N max |
|---|---|---|---|---|---|---|---|
| Grade 2 (CP) | Balance (99.2% min) | — | — | 0.30 | 0.25 | 0.08 | 0.03 |
| Grade 5 (Ti-6Al-4V) | Balance | 5.50 – 6.75 | 3.50 – 4.50 | 0.40 | 0.20 | 0.08 | 0.05 |
| Grade 9 (Ti-3Al-2.5V) | Balance | 2.50 – 3.50 | 2.00 – 3.00 | 0.25 | 0.15 | 0.08 | 0.03 |
Minimum mechanical property requirements in designated standard delivery condition:
| Grade | Tensile Strength (min) | Yield Strength 0.2% (min) | Elongation (min) | Hardness (max) |
|---|---|---|---|---|
| Grade 2 | 345 MPa (50 ksi) | 275 – 450 MPa (40–65 ksi) | 20% | 200 HB max |
| Grade 5 (Ti-6Al-4V) | 895 MPa (130 ksi) | 828 MPa (120 ksi) | 10% | 330 HB max / 36 HRC |
| Grade 9 (Ti-3Al-2.5V) | 620 MPa (90 ksi) | 483 MPa (70 ksi) | 15% | 260 HB max |
| Standard / Country | Designation |
|---|---|
| Titanium Grade 2 | UNS R50400 • Werkstoff 3.7035 • DIN Ti 2 • JIS Class 2 |
| Titanium Grade 5 | UNS R56400 • Werkstoff 3.7165 • Ti-6Al-4V • AMS 4928 • ISO 5832-3 |
| Titanium Grade 9 | UNS R56320 • Werkstoff 3.7194 • Ti-3Al-2.5V • AMS 4943 |
| Form / Type | Size Range | Length / Dimensions | Condition / Standard |
|---|---|---|---|
| Precision Ground Bar | 3 mm to 60 mm Dia | 1000 mm to 3500 mm | Centerless Ground, h8/h9, Ra < 0.4 µm |
| Peeled & Polished Bar | 25 mm to 120 mm Dia | Up to 4000 mm | Annealed, Peeled, k12/h11 |
| Hot Forged Titanium Bar | 80 mm to 250 mm Dia | Up to 3000 mm | Forged, Annealed & Rough Turned |
| Medical / Aerospace Cut Pins | All Sizes | Cut-to-size | Precision deburred, ready for Swiss CNC machining |
Custom dimensions, special cuts, and tailored surface conditions available on request.
Enter round bar diameter & length and click Calculate to get approximate weight.
Ganpat Metal manufactures and supplies certified Titanium Round Bars for industrial buyers across India. All materials are sourced from premium quality mills, fully tested for chemistry, mechanical properties, and dimensional tolerances, and supplied with complete traceable Mill Test Certificates.
Whether you require standard stock dimensions or customized sizes, Ganpat Metal maintains deep inventories in Mumbai and provides rapid dispatch, custom cut-to-length services, and third-party inspection support.
India
UAE
Saudi Arabia
Oman
Australia
Malaysia
Singapore
Bangladesh
Egypt
Brazil
Russia
Kazakhstan
| Requirement | Details to Provide |
|---|---|
| Grade | Titanium Grade 2 (UNS R50400) / Grade 5 (UNS R56400) / Grade 9 (UNS R56320) |
| Standard | ASTM B348 / ASME SB348 / AMS 4928 / ISO 5832-3 |
| Diameter (mm) | Required diameter in mm with tolerance requirement (h8, h9) |
| Length | Standard 1m / 2m / 3m or exact cut lengths in mm |
| Condition | Annealed / STA (Solution Treated & Aged) |
| Quantity | Required quantity in kg, meters, or pieces |
| Testing | PMI, Microstructure (Alpha-Beta grain size), Ultrasonic Testing per AMS 2631 |
| Documentation | EN 10204 Type 3.1 / 3.2 MTC with full trace |
